BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ZenTek Consultants - ECPv6.17.5//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://zentekconsultants.net
X-WR-CALDESC:Events for ZenTek Consultants
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261001T110000
DTEND;TZID=America/New_York:20261001T130000
DTSTAMP:20260803T130347Z
CREATED:20260803T130248Z
LAST-MODIFIED:20260803T130347Z
UID:10004687-1790852400-1790859600@zentekconsultants.net
SUMMARY:Parking Lot Design I
DESCRIPTION:Learn the fundamentals of site grading and parking lot design in Civil 3D and Vehicle Tracking with this hands-on course. You’ll explore surface creation and modification\, analysis\, and labeling\, then move into grading design using feature lines and grading objects. By the end of the class\, you’ll be able to develop a practical\, dynamic grading plan for parking lots while mastering the Civil 3D and Vehicle Tracking tools that make the process efficient and precise. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026 and Autodesk Vehicle Tracking 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Surfaces Modeling \n\nUnderstanding Surface Definitions\nCreating a Surface\nModifying Surfaces\nCreating and Managing Surface Styles\nSurface Analysis and Labeling\n\nSession 2: Grading Design Tools \n\nUnderstanding Feature Lines\nCreating Feature Lines from Existing Objects\nCreating New Feature Lines\nUsing Stepped Offsets\nWhat are Grading Objects\nCreating Simple Grading Objects\nDynamic Interaction of Grading Objects\nBuilding Surfaces from Grading Objects
URL:https://zentekconsultants.net/event/parking-lot-design-i-2/2026-10-01/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Parking Lot Design I,Parking Lot Design I,Parking Lot Design II,Vehicle Tracking Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261005T110000
DTEND;TZID=America/New_York:20261005T130000
DTSTAMP:20260806T112307Z
CREATED:20260806T112240Z
LAST-MODIFIED:20260806T112307Z
UID:10004692-1791198000-1791205200@zentekconsultants.net
SUMMARY:Hydrology Design in Civil 3D With SSA I
DESCRIPTION:This course introduces Storm & Sanitary Analysis (SSA)\, Civil 3D’s built-in hydrology tool\, to develop\, edit\, and manage pre- and post-development watersheds directly within your Civil 3D project. You’ll learn to create watersheds\, generate TOC lines\, import soils data\, size and edit detention ponds\, and generate reports – all within a streamlined Civil 3D workflow. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Pre-Development Watersheds \n\nCreating Pre-Dev Watersheds in Civil 3D\nGenerating TOC Lines\nImporting Soils Information\nRunning SSA Stand-Alone\nBuilding a Pre-Dev Detention Pond in SSA\n\nSession 2: Post-Development Watershed \n\nCreating Post-Dev Watersheds in Civil 3D\nBuilding a Post-Dev Detention Pond in SSA\nSizing and Editing Detention Ponds in SSA\nWorking with Stage Storage Tables\nOutlet Control Structures in SSA\nReports in SSA
URL:https://zentekconsultants.net/event/hydrology-design-in-civil-3d-with-ssa-i/2026-10-05/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Hydrology Design in Civil 3D With SSA I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261006T110000
DTEND;TZID=America/New_York:20261006T130000
DTSTAMP:20260806T112307Z
CREATED:20260806T112240Z
LAST-MODIFIED:20260806T112307Z
UID:10004693-1791284400-1791291600@zentekconsultants.net
SUMMARY:Hydrology Design in Civil 3D With SSA I
DESCRIPTION:This course introduces Storm & Sanitary Analysis (SSA)\, Civil 3D’s built-in hydrology tool\, to develop\, edit\, and manage pre- and post-development watersheds directly within your Civil 3D project. You’ll learn to create watersheds\, generate TOC lines\, import soils data\, size and edit detention ponds\, and generate reports – all within a streamlined Civil 3D workflow. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Pre-Development Watersheds \n\nCreating Pre-Dev Watersheds in Civil 3D\nGenerating TOC Lines\nImporting Soils Information\nRunning SSA Stand-Alone\nBuilding a Pre-Dev Detention Pond in SSA\n\nSession 2: Post-Development Watershed \n\nCreating Post-Dev Watersheds in Civil 3D\nBuilding a Post-Dev Detention Pond in SSA\nSizing and Editing Detention Ponds in SSA\nWorking with Stage Storage Tables\nOutlet Control Structures in SSA\nReports in SSA
URL:https://zentekconsultants.net/event/hydrology-design-in-civil-3d-with-ssa-i/2026-10-06/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Hydrology Design in Civil 3D With SSA I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261007T110000
DTEND;TZID=America/New_York:20261007T130000
DTSTAMP:20260803T130404Z
CREATED:20260803T130330Z
LAST-MODIFIED:20260803T130404Z
UID:10004508-1791370800-1791378000@zentekconsultants.net
SUMMARY:Parking Lot Design II
DESCRIPTION:Advance your parking lot design skills with this hands-on Civil 3D course\, combining swept path analysis and intelligent layout techniques. You’ll learn to create and analyze vehicle paths\, check clearances\, and generate turn templates\, then apply Autodesk Vehicle Tracking to efficiently design single\, double\, and parallel row parking layouts. By the end\, you’ll be able to develop functional\, code-compliant parking areas that keep traffic flowing safely and effectively. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026 and Autodesk Vehicle Tracking 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Swept Path Analysis In-Depth \n\nCreating a Manual Drive Swept Path\nUnderstanding the Report Wizard\nChecking Vertical Clearance\nGenerating a Vehicle and Ground Profile\nGenerating an Additional Vehicle Along a Swept Path\nAdding a Vehicle to a Site Plan\nGenerating a Turn Template Using the Template Wizard\n\nSession 2: Parking Design \n\nUnderstanding and Modifying the Parking Standard Library\nModifying Parking Bays\nCreating and Editing Single Row Parking Bays\nCreating and Editing Double Row Parking Bays\nCreating and Editing Parallel Rows and Stalls\nCreating Access Roads through Parking Areas
URL:https://zentekconsultants.net/event/parking-lot-design-ii-2/2026-10-07/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Parking Lot Design I,Parking Lot Design II,Parking Lot Design II,Vehicle Tracking Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261008T110000
DTEND;TZID=America/New_York:20261008T130000
DTSTAMP:20260803T130404Z
CREATED:20260803T130330Z
LAST-MODIFIED:20260803T130404Z
UID:10004688-1791457200-1791464400@zentekconsultants.net
SUMMARY:Parking Lot Design II
DESCRIPTION:Advance your parking lot design skills with this hands-on Civil 3D course\, combining swept path analysis and intelligent layout techniques. You’ll learn to create and analyze vehicle paths\, check clearances\, and generate turn templates\, then apply Autodesk Vehicle Tracking to efficiently design single\, double\, and parallel row parking layouts. By the end\, you’ll be able to develop functional\, code-compliant parking areas that keep traffic flowing safely and effectively. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026 and Autodesk Vehicle Tracking 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Swept Path Analysis In-Depth \n\nCreating a Manual Drive Swept Path\nUnderstanding the Report Wizard\nChecking Vertical Clearance\nGenerating a Vehicle and Ground Profile\nGenerating an Additional Vehicle Along a Swept Path\nAdding a Vehicle to a Site Plan\nGenerating a Turn Template Using the Template Wizard\n\nSession 2: Parking Design \n\nUnderstanding and Modifying the Parking Standard Library\nModifying Parking Bays\nCreating and Editing Single Row Parking Bays\nCreating and Editing Double Row Parking Bays\nCreating and Editing Parallel Rows and Stalls\nCreating Access Roads through Parking Areas
URL:https://zentekconsultants.net/event/parking-lot-design-ii-2/2026-10-08/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Parking Lot Design I,Parking Lot Design II,Parking Lot Design II,Vehicle Tracking Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261009T150000
DTEND;TZID=America/New_York:20261009T170000
DTSTAMP:20260924T104047Z
CREATED:20260625T113643Z
LAST-MODIFIED:20260924T104047Z
UID:10004514-1791558000-1791565200@zentekconsultants.net
SUMMARY:Creating Civil 3D Standards I
DESCRIPTION:This course is designed for CAD Managers and civil/site professionals who want to improve efficiency and consistency across their Civil 3D projects. You’ll learn to develop and implement system-wide standards\, including templates\, layers\, annotation\, and plotting standards. The class also covers object display and label styles\, along with automated labeling techniques to streamline workflows and maximize productivity. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Working with C3D Templates \n\nCivil 3D Default Settings\nLayers\, Annotation & Plotting Standards for Civil 3D\nAutomating Point Objects with Descriptor Keys and Point Groups\n\nSession 2: It’s All About Style \n\nWorking With Object Display Styles\nWorking With & Customizing Label Styles\nAdvanced Annotation: Automate Labeling
URL:https://zentekconsultants.net/event/creating-civil-3d-standards-i-2/2026-10-09/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Creating Civil 3D Standards I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261014T110000
DTEND;TZID=America/New_York:20261014T130000
DTSTAMP:20260819T155342Z
CREATED:20260819T155342Z
LAST-MODIFIED:20260819T155342Z
UID:10004707-1791975600-1791982800@zentekconsultants.net
SUMMARY:Substation Site Development in Civil 3D I
DESCRIPTION:Developing a substation site requires a combination of precise grading and surface management skills in Civil 3D. This course focuses on the foundational workflows needed for substation site preparation\, including feature line grading\, grading objects\, and surface creation. You’ll learn how to model pads\, access roads\, equipment areas\, and drainage features while managing existing and proposed surfaces for accurate analysis and visualization. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Grading Fundamentals \n\nOverview of grading workflows in Civil 3D\nFeature lines: creation\, elevation editing\, and breaklines\nGradings and grading groups\nWorkflow for creating substation pads\, access roads\, and equipment areas\nWorkflow for swales\, berms\, and basins\n\nSession 2: Surface Creation and Management \n\nExisting surface creation\nProposed Surface Creation\nSurface Analysis\nSurface styles and visualization for grading review
URL:https://zentekconsultants.net/event/substation-site-development-in-civil-3d-i/2026-10-14/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Substation Site Development in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261015T110000
DTEND;TZID=America/New_York:20261015T130000
DTSTAMP:20260819T155342Z
CREATED:20260819T155342Z
LAST-MODIFIED:20260819T155342Z
UID:10004708-1792062000-1792069200@zentekconsultants.net
SUMMARY:Substation Site Development in Civil 3D I
DESCRIPTION:Developing a substation site requires a combination of precise grading and surface management skills in Civil 3D. This course focuses on the foundational workflows needed for substation site preparation\, including feature line grading\, grading objects\, and surface creation. You’ll learn how to model pads\, access roads\, equipment areas\, and drainage features while managing existing and proposed surfaces for accurate analysis and visualization. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Grading Fundamentals \n\nOverview of grading workflows in Civil 3D\nFeature lines: creation\, elevation editing\, and breaklines\nGradings and grading groups\nWorkflow for creating substation pads\, access roads\, and equipment areas\nWorkflow for swales\, berms\, and basins\n\nSession 2: Surface Creation and Management \n\nExisting surface creation\nProposed Surface Creation\nSurface Analysis\nSurface styles and visualization for grading review
URL:https://zentekconsultants.net/event/substation-site-development-in-civil-3d-i/2026-10-15/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Substation Site Development in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261016T110000
DTEND;TZID=America/New_York:20261016T130000
DTSTAMP:20260819T153359Z
CREATED:20260819T153334Z
LAST-MODIFIED:20260819T153359Z
UID:10004387-1792148400-1792155600@zentekconsultants.net
SUMMARY:Roadway Rehabilitation in Civil 3D I
DESCRIPTION:Road repair and rehabilitation are often misunderstood in Civil 3D. This course introduces designers to the fundamentals of creating and managing rehab corridors. You’ll learn to set up new rehab corridors\, apply basic corridor controls\, edit and add subassemblies\, and use the Rehab Manager to generate reports for accurate\, efficient roadway rehabilitation design. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Understanding Roadway Rehab Corridors \n\nRoad Rehab Concepts Explained\nExisting Design Elements for Rehab Corridors\nCreating a New Rehab Corridor\nBasic Rehab Corridor Controls\n\nSession 2: Finalizing Roadway Rehab Design \n\nFinding and Editing Rehab Subassemblies\nAdding Standard Subassemblies to Rehab Assemblies\nUsing Rehab Manager\nGenerating Reports
URL:https://zentekconsultants.net/event/roadway-rehabilitation-in-civil-3d-i-2/2026-10-16/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Roadway Rehabilitation in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261016T150000
DTEND;TZID=America/New_York:20261016T170000
DTSTAMP:20260924T104047Z
CREATED:20260625T113643Z
LAST-MODIFIED:20260924T104047Z
UID:10004776-1792162800-1792170000@zentekconsultants.net
SUMMARY:Creating Civil 3D Standards I
DESCRIPTION:This course is designed for CAD Managers and civil/site professionals who want to improve efficiency and consistency across their Civil 3D projects. You’ll learn to develop and implement system-wide standards\, including templates\, layers\, annotation\, and plotting standards. The class also covers object display and label styles\, along with automated labeling techniques to streamline workflows and maximize productivity. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Working with C3D Templates \n\nCivil 3D Default Settings\nLayers\, Annotation & Plotting Standards for Civil 3D\nAutomating Point Objects with Descriptor Keys and Point Groups\n\nSession 2: It’s All About Style \n\nWorking With Object Display Styles\nWorking With & Customizing Label Styles\nAdvanced Annotation: Automate Labeling
URL:https://zentekconsultants.net/event/creating-civil-3d-standards-i-2/2026-10-16/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Creating Civil 3D Standards I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261019T110000
DTEND;TZID=America/New_York:20261019T130000
DTSTAMP:20260826T112441Z
CREATED:20260806T112512Z
LAST-MODIFIED:20260826T112441Z
UID:10004719-1792407600-1792414800@zentekconsultants.net
SUMMARY:Hydrology Design in Civil 3D With SSA II
DESCRIPTION:Building on Level I\, this course dives deeper into designing\, sizing\, and analyzing hydrologic systems using Civil 3D’s Storm & Sanitary Analysis (SSA). You’ll learn to create and manage pipe networks\, export designs to SSA\, perform detailed inlet and conveyance analysis\, connect sub-basins and structures\, handle bypass flow\, and generate hydrology reports. By the end\, you’ll be able to integrate verified hydrologic functionality into your Civil 3D projects for accurate\, efficient\, and fully documented designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Inlet and Pipe Design in Civil 3D \n\nBuilding Pipe Parts Lists in C3D\nSetting up Migration Defaults\nDrawing a Pipe Network in C3D\nExporting Pipe Networks to SSA\n\nSession 2: Inlet and Pipe Design in SSA \n\nAnalysis and IDF Curve Settings\nStructure and Conveyance Controls\nConnecting Sub-Basins and Structures\nWorking with By-Pass Flow\nNetwork Analysis and Sizing Process\nReports in SSA\nExporting Design to a File\nImporting Designs and updating Civil 3D
URL:https://zentekconsultants.net/event/hydrology-design-in-civil-3d-with-ssa-ii/2026-10-19/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Hydrology Design in Civil 3D With SSA II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261019T110000
DTEND;TZID=America/New_York:20261019T130000
DTSTAMP:20260819T153359Z
CREATED:20260819T153334Z
LAST-MODIFIED:20260819T153359Z
UID:10004705-1792407600-1792414800@zentekconsultants.net
SUMMARY:Roadway Rehabilitation in Civil 3D I
DESCRIPTION:Road repair and rehabilitation are often misunderstood in Civil 3D. This course introduces designers to the fundamentals of creating and managing rehab corridors. You’ll learn to set up new rehab corridors\, apply basic corridor controls\, edit and add subassemblies\, and use the Rehab Manager to generate reports for accurate\, efficient roadway rehabilitation design. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Understanding Roadway Rehab Corridors \n\nRoad Rehab Concepts Explained\nExisting Design Elements for Rehab Corridors\nCreating a New Rehab Corridor\nBasic Rehab Corridor Controls\n\nSession 2: Finalizing Roadway Rehab Design \n\nFinding and Editing Rehab Subassemblies\nAdding Standard Subassemblies to Rehab Assemblies\nUsing Rehab Manager\nGenerating Reports
URL:https://zentekconsultants.net/event/roadway-rehabilitation-in-civil-3d-i-2/2026-10-19/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Roadway Rehabilitation in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261020T110000
DTEND;TZID=America/New_York:20261020T130000
DTSTAMP:20260826T112441Z
CREATED:20260806T112512Z
LAST-MODIFIED:20260826T112441Z
UID:10004720-1792494000-1792501200@zentekconsultants.net
SUMMARY:Hydrology Design in Civil 3D With SSA II
DESCRIPTION:Building on Level I\, this course dives deeper into designing\, sizing\, and analyzing hydrologic systems using Civil 3D’s Storm & Sanitary Analysis (SSA). You’ll learn to create and manage pipe networks\, export designs to SSA\, perform detailed inlet and conveyance analysis\, connect sub-basins and structures\, handle bypass flow\, and generate hydrology reports. By the end\, you’ll be able to integrate verified hydrologic functionality into your Civil 3D projects for accurate\, efficient\, and fully documented designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Inlet and Pipe Design in Civil 3D \n\nBuilding Pipe Parts Lists in C3D\nSetting up Migration Defaults\nDrawing a Pipe Network in C3D\nExporting Pipe Networks to SSA\n\nSession 2: Inlet and Pipe Design in SSA \n\nAnalysis and IDF Curve Settings\nStructure and Conveyance Controls\nConnecting Sub-Basins and Structures\nWorking with By-Pass Flow\nNetwork Analysis and Sizing Process\nReports in SSA\nExporting Design to a File\nImporting Designs and updating Civil 3D
URL:https://zentekconsultants.net/event/hydrology-design-in-civil-3d-with-ssa-ii/2026-10-20/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Hydrology Design in Civil 3D With SSA II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261021T110000
DTEND;TZID=America/New_York:20261021T130000
DTSTAMP:20260819T155515Z
CREATED:20260819T155515Z
LAST-MODIFIED:20260819T155515Z
UID:10004709-1792580400-1792587600@zentekconsultants.net
SUMMARY:Substation Site Development in Civil 3D II
DESCRIPTION:Building on the fundamentals covered in Level I\, this course introduces alignment\, profile\, and corridor modeling workflows essential for refining substation site designs. You’ll learn to design access roads and drainage features\, develop and edit profiles\, and create simple corridors for roads and ditches. The class emphasizes integrating grading\, surfaces\, profiles\, and corridors into a cohesive Civil 3D model for accurate design\, documentation\, and quantity analysis. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Alignments & Profiles \n\nCreating alignments for access roads and utilities\nAlignment styles\, labels\, and design criteria\nGenerating existing ground profiles from surfaces\nDesigning proposed profiles with vertical geometry tools\nProfile view styles and band sets\nManaging multiple profiles and profile data references\nProfile annotation and documentation standard\n\nSession 2: Simple Corridor Modeling & Design Integration \n\nAssemblies and subassemblies for access roads and ditches\nCorridor creation and targeting (alignments\, profiles\, surfaces)\nCorridor regions and transitions\nExtracting corridor surfaces and feature lines\nCreating cross sections and section views\nCorridor quantity takeoffs and material volumes\nIntegrating grading\, profiles\, and corridors into a unified model
URL:https://zentekconsultants.net/event/substation-site-development-in-civil-3d-ii/2026-10-21/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Substation Site Development in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261021T150000
DTEND;TZID=America/New_York:20261021T170000
DTSTAMP:20260824T130019Z
CREATED:20260824T130001Z
LAST-MODIFIED:20260824T130019Z
UID:10004547-1792594800-1792602000@zentekconsultants.net
SUMMARY:Beginning Autodesk Civil 3D I
DESCRIPTION:This course is designed for anyone new to Autodesk Civil 3D who wants to build a strong foundation in civil and site design. You’ll learn the essentials of navigating the Civil 3D environment\, understanding dynamic objects\, and working with the program’s powerful drafting and design tools. Whether you’re transitioning from 2D AutoCAD\, coming from another design platform\, or starting fresh in drafting\, this class will give you the skills and confidence to create\, manage\, and annotate your first Civil 3D projects effectively. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \nNote: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: The Autodesk Civil 3D Environment \n\nWhat is Civil 3D\nUnderstanding Dynamic Objects\nUnderstanding the User Interface\nWorking with the Civil 3D Toolspace\nUnderstanding Label and Display Styles\n\nSession 2: Drawing Creation\, Setup & Settings \n\nStart\, Learn\, & Create Tabs\nWorking With Templates\nDrawing Scale and Map Zones\nDefault Settings\nUnderstanding the Settings Tab\nImporting/Exporting Settings and Styles
URL:https://zentekconsultants.net/event/beginning-autodesk-civil-3d-i-2/2026-10-21/
LOCATION:Online
CATEGORIES:Beginning Autodesk Civil 3D I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261022T110000
DTEND;TZID=America/New_York:20261022T130000
DTSTAMP:20260819T155515Z
CREATED:20260819T155515Z
LAST-MODIFIED:20260819T155515Z
UID:10004710-1792666800-1792674000@zentekconsultants.net
SUMMARY:Substation Site Development in Civil 3D II
DESCRIPTION:Building on the fundamentals covered in Level I\, this course introduces alignment\, profile\, and corridor modeling workflows essential for refining substation site designs. You’ll learn to design access roads and drainage features\, develop and edit profiles\, and create simple corridors for roads and ditches. The class emphasizes integrating grading\, surfaces\, profiles\, and corridors into a cohesive Civil 3D model for accurate design\, documentation\, and quantity analysis. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Alignments & Profiles \n\nCreating alignments for access roads and utilities\nAlignment styles\, labels\, and design criteria\nGenerating existing ground profiles from surfaces\nDesigning proposed profiles with vertical geometry tools\nProfile view styles and band sets\nManaging multiple profiles and profile data references\nProfile annotation and documentation standard\n\nSession 2: Simple Corridor Modeling & Design Integration \n\nAssemblies and subassemblies for access roads and ditches\nCorridor creation and targeting (alignments\, profiles\, surfaces)\nCorridor regions and transitions\nExtracting corridor surfaces and feature lines\nCreating cross sections and section views\nCorridor quantity takeoffs and material volumes\nIntegrating grading\, profiles\, and corridors into a unified model
URL:https://zentekconsultants.net/event/substation-site-development-in-civil-3d-ii/2026-10-22/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Substation Site Development in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261022T150000
DTEND;TZID=America/New_York:20261022T170000
DTSTAMP:20260824T130019Z
CREATED:20260824T130001Z
LAST-MODIFIED:20260824T130019Z
UID:10004716-1792681200-1792688400@zentekconsultants.net
SUMMARY:Beginning Autodesk Civil 3D I
DESCRIPTION:This course is designed for anyone new to Autodesk Civil 3D who wants to build a strong foundation in civil and site design. You’ll learn the essentials of navigating the Civil 3D environment\, understanding dynamic objects\, and working with the program’s powerful drafting and design tools. Whether you’re transitioning from 2D AutoCAD\, coming from another design platform\, or starting fresh in drafting\, this class will give you the skills and confidence to create\, manage\, and annotate your first Civil 3D projects effectively. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \nNote: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: The Autodesk Civil 3D Environment \n\nWhat is Civil 3D\nUnderstanding Dynamic Objects\nUnderstanding the User Interface\nWorking with the Civil 3D Toolspace\nUnderstanding Label and Display Styles\n\nSession 2: Drawing Creation\, Setup & Settings \n\nStart\, Learn\, & Create Tabs\nWorking With Templates\nDrawing Scale and Map Zones\nDefault Settings\nUnderstanding the Settings Tab\nImporting/Exporting Settings and Styles
URL:https://zentekconsultants.net/event/beginning-autodesk-civil-3d-i-2/2026-10-22/
LOCATION:Online
CATEGORIES:Beginning Autodesk Civil 3D I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261023T110000
DTEND;TZID=America/New_York:20261023T130000
DTSTAMP:20260923T124312Z
CREATED:20260625T114452Z
LAST-MODIFIED:20260923T124312Z
UID:10004758-1792753200-1792760400@zentekconsultants.net
SUMMARY:Building Civil 3D Corridors I
DESCRIPTION:Linear corridor design is a foundational skill for any Civil 3D designer. This course guides you through creating and editing corridors\, building assemblies\, and controlling transitions. You’ll also learn how to design elbows and cul-de-sacs\, connect multiple baselines\, and develop a cohesive\, accurately graded corridor for real-world roadway projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Corridor Basics (August 24) \n\nCreating and editing an assembly\nBuilding a basic corridor\nUnderstanding the properties of a corridor\nWorking with corridor regions\nTargeting objects for width and elevation\nControlling corridor transitions\n\nSession 2: Working with Cul-de-sacs and Elbows (August 25) \n\nCreating and working with regions\nBuilding cul-de-sac profiles\nCreating cul-de-sac assemblies\nWorking with multiple baselines\nUsing multiple assemblies to a design
URL:https://zentekconsultants.net/event/building-civil-3d-corridors-i/2026-10-23/
LOCATION:Online
CATEGORIES:Building Civil 3D Corridors I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261023T110000
DTEND;TZID=America/New_York:20261023T130000
DTSTAMP:20260819T153453Z
CREATED:20260819T153429Z
LAST-MODIFIED:20260819T153453Z
UID:10004389-1792753200-1792760400@zentekconsultants.net
SUMMARY:Roadway Rehabilitation in Civil 3D II
DESCRIPTION:Building on Level I\, this course dives into advanced rehabilitation corridor techniques in Civil 3D. You’ll learn to create flexible\, editable\, and intelligent rehab models for complex corridors\, including intersections\, custom assembly sets\, and advanced subassembly configurations. The class also covers applying superelevation to rehab projects\, replacing curbs and sidewalks\, and best practices for integrating legacy assemblies\, giving you the tools to efficiently model and manage complex roadway rehabilitation designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Rehab in Complex Corridors \n\nCreating Custom Assembly Sets for Complex Corridors\nAdjusting Rehab Subassembly Parameters\nRehab in Intersections\nAdding and Configuring Additional Subassemblies\n\nSession 2: Rehab and Superelevation \n\nApplying Superelevation to a Roadway Design\nAddressing Superelevation in Rehab\nUsing the Replace Curb and Sidewalk Assemblies\nBest Practices with Legacy Rehab Assemblies
URL:https://zentekconsultants.net/event/roadway-rehabilitation-in-civil-3d-ii-2/2026-10-23/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Roadway Rehabilitation in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261023T150000
DTEND;TZID=America/New_York:20261023T170000
DTSTAMP:20260924T104112Z
CREATED:20260811T123156Z
LAST-MODIFIED:20260924T104112Z
UID:10004777-1792767600-1792774800@zentekconsultants.net
SUMMARY:Creating Civil 3D Standards II
DESCRIPTION:Building on Level I\, this course guides CAD Managers and advanced Civil 3D users through developing robust data controls and automation workflows across their firm. You’ll learn to organize project structures\, manage data shortcuts and Xrefs\, and implement templates and pre-defined standards for pipes\, point groups\, and surfaces – ensuring consistent\, efficient\, and high-quality Civil 3D project delivery. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Data Control \n\nProject Structures for Civil Firms\nOrganizing Your Design Data with Tool Palettes\nManaging Data Shortcuts and Xrefs\n\nSession 2: Advanced Automation \n\nTemplates for Plan\, Section\, and Profile Production\nBuilding the Pipe Network Database\nPre-Defined Point Groups and Surfaces
URL:https://zentekconsultants.net/event/__trashed/2026-10-23/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Creating Civil 3D Standards II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261026T110000
DTEND;TZID=America/New_York:20261026T130000
DTSTAMP:20260819T153453Z
CREATED:20260819T153429Z
LAST-MODIFIED:20260819T153453Z
UID:10004706-1793012400-1793019600@zentekconsultants.net
SUMMARY:Roadway Rehabilitation in Civil 3D II
DESCRIPTION:Building on Level I\, this course dives into advanced rehabilitation corridor techniques in Civil 3D. You’ll learn to create flexible\, editable\, and intelligent rehab models for complex corridors\, including intersections\, custom assembly sets\, and advanced subassembly configurations. The class also covers applying superelevation to rehab projects\, replacing curbs and sidewalks\, and best practices for integrating legacy assemblies\, giving you the tools to efficiently model and manage complex roadway rehabilitation designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Rehab in Complex Corridors \n\nCreating Custom Assembly Sets for Complex Corridors\nAdjusting Rehab Subassembly Parameters\nRehab in Intersections\nAdding and Configuring Additional Subassemblies\n\nSession 2: Rehab and Superelevation \n\nApplying Superelevation to a Roadway Design\nAddressing Superelevation in Rehab\nUsing the Replace Curb and Sidewalk Assemblies\nBest Practices with Legacy Rehab Assemblies
URL:https://zentekconsultants.net/event/roadway-rehabilitation-in-civil-3d-ii-2/2026-10-26/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Roadway Rehabilitation in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261028T150000
DTEND;TZID=America/New_York:20261028T170000
DTSTAMP:20260824T130104Z
CREATED:20260824T130047Z
LAST-MODIFIED:20260824T130104Z
UID:10004549-1793199600-1793206800@zentekconsultants.net
SUMMARY:Beginning Autodesk Civil 3D II
DESCRIPTION:Take your Civil 3D skills to the next level with this project-focused course designed for users who want to work efficiently at a higher level. You’ll explore Civil 3D objects\, annotation\, tables\, and analysis tools\, while learning to manage projects\, share data\, and work with references and shortcuts. Perfect for occasional users or professionals looking to enhance their value and confidence in real-world Civil 3D workflows. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \nNote: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Understanding Civil 3D Objects & Tools \n\nObject Types Explained\nContext Sensitive Ribbons\nCivil 3D Annotation Tools\nCivil 3D Tables\nAnalysis and Query Tools\n\nSession 2: Project & Data Management \n\nUnderstanding & Creating Civil 3D Projects\nSharing Civil 3D Data\nWorking With Data Shortcuts\nWorking With Xref Structure in Civil 3D
URL:https://zentekconsultants.net/event/beginning-autodesk-civil-3d-ii-2/2026-10-28/
LOCATION:Online
CATEGORIES:Beginning Autodesk Civil 3D II,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261029T150000
DTEND;TZID=America/New_York:20261029T170000
DTSTAMP:20260824T130104Z
CREATED:20260824T130047Z
LAST-MODIFIED:20260824T130104Z
UID:10004717-1793286000-1793293200@zentekconsultants.net
SUMMARY:Beginning Autodesk Civil 3D II
DESCRIPTION:Take your Civil 3D skills to the next level with this project-focused course designed for users who want to work efficiently at a higher level. You’ll explore Civil 3D objects\, annotation\, tables\, and analysis tools\, while learning to manage projects\, share data\, and work with references and shortcuts. Perfect for occasional users or professionals looking to enhance their value and confidence in real-world Civil 3D workflows. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \nNote: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Understanding Civil 3D Objects & Tools \n\nObject Types Explained\nContext Sensitive Ribbons\nCivil 3D Annotation Tools\nCivil 3D Tables\nAnalysis and Query Tools\n\nSession 2: Project & Data Management \n\nUnderstanding & Creating Civil 3D Projects\nSharing Civil 3D Data\nWorking With Data Shortcuts\nWorking With Xref Structure in Civil 3D
URL:https://zentekconsultants.net/event/beginning-autodesk-civil-3d-ii-2/2026-10-29/
LOCATION:Online
CATEGORIES:Beginning Autodesk Civil 3D II,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261030T110000
DTEND;TZID=America/New_York:20261030T130000
DTSTAMP:20260923T124312Z
CREATED:20260625T114452Z
LAST-MODIFIED:20260923T124312Z
UID:10004774-1793358000-1793365200@zentekconsultants.net
SUMMARY:Building Civil 3D Corridors I
DESCRIPTION:Linear corridor design is a foundational skill for any Civil 3D designer. This course guides you through creating and editing corridors\, building assemblies\, and controlling transitions. You’ll also learn how to design elbows and cul-de-sacs\, connect multiple baselines\, and develop a cohesive\, accurately graded corridor for real-world roadway projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Corridor Basics (August 24) \n\nCreating and editing an assembly\nBuilding a basic corridor\nUnderstanding the properties of a corridor\nWorking with corridor regions\nTargeting objects for width and elevation\nControlling corridor transitions\n\nSession 2: Working with Cul-de-sacs and Elbows (August 25) \n\nCreating and working with regions\nBuilding cul-de-sac profiles\nCreating cul-de-sac assemblies\nWorking with multiple baselines\nUsing multiple assemblies to a design
URL:https://zentekconsultants.net/event/building-civil-3d-corridors-i/2026-10-30/
LOCATION:Online
CATEGORIES:Building Civil 3D Corridors I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261030T150000
DTEND;TZID=America/New_York:20261030T170000
DTSTAMP:20260924T104112Z
CREATED:20260811T123156Z
LAST-MODIFIED:20260924T104112Z
UID:10004778-1793372400-1793379600@zentekconsultants.net
SUMMARY:Creating Civil 3D Standards II
DESCRIPTION:Building on Level I\, this course guides CAD Managers and advanced Civil 3D users through developing robust data controls and automation workflows across their firm. You’ll learn to organize project structures\, manage data shortcuts and Xrefs\, and implement templates and pre-defined standards for pipes\, point groups\, and surfaces – ensuring consistent\, efficient\, and high-quality Civil 3D project delivery. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Data Control \n\nProject Structures for Civil Firms\nOrganizing Your Design Data with Tool Palettes\nManaging Data Shortcuts and Xrefs\n\nSession 2: Advanced Automation \n\nTemplates for Plan\, Section\, and Profile Production\nBuilding the Pipe Network Database\nPre-Defined Point Groups and Surfaces
URL:https://zentekconsultants.net/event/__trashed/2026-10-30/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Creating Civil 3D Standards II
END:VEVENT
END:VCALENDAR