BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ZenTek Consultants - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://zentekconsultants.net
X-WR-CALDESC:Events for ZenTek Consultants
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260810T110000
DTEND;TZID=America/New_York:20260810T130000
DTSTAMP:20260615T142205Z
CREATED:20260615T142142Z
LAST-MODIFIED:20260615T142205Z
UID:10004410-1786359600-1786366800@zentekconsultants.net
SUMMARY:Automating Survey Drafting in Civil 3D I
DESCRIPTION:Survey drafting in Civil 3D can be time-consuming—but with automation\, you can drastically speed up basemap creation. This course introduces “field-to-finish” survey processes\, guiding you through configuring survey databases\, importing field data\, setting up linework code sets\, and creating styles. You’ll gain the skills to streamline survey workflows and maximize efficiency. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Introduction to Field to Finish (August 10) \n\nIntroducing the Survey Interface\nConfiguring Survey Settings\nCreating a Project-based Survey Database\nAdditional Supporting Databases\nImporting Field Data\nImporting Events\nAnalyzing Networks\n\nSession 2: Setting Up for Field to Finish (August 11) \n\nConfiguring Linework Code Sets\nCreating Styles for Field to Finish\nConfiguring Figure Prefixes for Field-defined Linework\nSetting up Description Keys for Port Import
URL:https://zentekconsultants.net/event/automating-survey-drafting-in-civil-3d-i-2/2026-08-10/
LOCATION:Online
CATEGORIES:Automating Survey Drafting in Civil 3D I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260812T103000
DTEND;TZID=America/New_York:20260812T123000
DTSTAMP:20260714T125059Z
CREATED:20260605T111521Z
LAST-MODIFIED:20260714T125059Z
UID:10004641-1786530600-1786537800@zentekconsultants.net
SUMMARY:Public Agency Work in Civil 3D I
DESCRIPTION:This course is tailored for professionals in public works organizations who need to work efficiently with Autodesk Civil 3D on site and roadway projects. You’ll learn how to leverage GIS data\, create and modify alignments and profiles\, and develop parametric corridor designs. From building in-house projects to reviewing submissions from consultants\, this class gives you the tools and confidence to manage public agency civil design work effectively. \nThis four (4) hour course is delivered in two (2)\, two-hour long sessions that students can attend online\, right from their own desk. A live instructor will explain the detailed functions\, and address questions as the class progresses. \nNote: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Alignments and Profiles \n\nUsing GIS surfaces as a basis for planning a design\nCreating intelligent alignments for roadway or utility design\nModifying the geometry and properties of alignments\nSetting up profiles in profile views for vertical design\nDesigning and modifying vertical alignment geometry\n\nSession 2: Corridors \n\nCreating parametric cross-sectional designs linked to a roadway model\nGenerating 3D representations of roadway models\nIntegrating AASHTO standards that assist with achieving good design\nAccomplishing roadway rehab using specialized tools
URL:https://zentekconsultants.net/event/public-agency-work-in-civil-3d-i/2026-08-12/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Public Agency Work in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260812T143000
DTEND;TZID=America/New_York:20260812T163000
DTSTAMP:20260722T135806Z
CREATED:20260615T141326Z
LAST-MODIFIED:20260722T135806Z
UID:10004664-1786545000-1786552200@zentekconsultants.net
SUMMARY:Surface Design in Civil 3D I
DESCRIPTION:Mastering surface design in Civil 3D is essential for efficient site modeling and design. This course guides you through the fundamentals of creating\, labeling\, and displaying surfaces\, as well as controlling contour and point styles. You’ll also learn how to manage surface components such as points\, boundaries\, and breaklines\, giving you the skills to develop accurate and professional site surfaces with confidence. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Surfaces Made Simple (August 12) \n\nUnderstanding Surfaces\nSetting Surface Labels/Display\nControlling Contour Display Styles\nCreating/Modifying Surface Display Styles\nCreating/Modifying Surface Label Styles\nAdding Contour Labels\nAdding Point Labels\n\nSession 2: Surface Component Controls (August 13) \n\nAdding Points/Point Groups\nAdding Boundaries\nAdding/Editing Surface Points\nAdding/Editing Breaklines\nSwap Edges and Smooth Surfaces\nReviewing Surface Details/Information
URL:https://zentekconsultants.net/event/surface-design-in-civil-3d-i-2/2026-08-12/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Surface Design in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260817T110000
DTEND;TZID=America/New_York:20260817T130000
DTSTAMP:20260615T142258Z
CREATED:20260615T142234Z
LAST-MODIFIED:20260615T142258Z
UID:10004412-1786964400-1786971600@zentekconsultants.net
SUMMARY:Automating Survey Drafting in Civil 3D II
DESCRIPTION:Building on basic survey automation\, this course dives into advanced Civil 3D survey database processes that every survey drafter needs. You’ll learn post-processing techniques\, managing point groups\, correcting coding errors\, creating surfaces\, and leveraging survey queries and tools like Mapcheck and the Geodetic Calculator—enabling efficient\, accurate\, and automated survey workflows. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Post-Processing (August 17) \n\nImporting Survey Data\nAdjusting for Coding Errors\nApplying Cosmetic Changes to Imported Data\nWorking with Point Groups from the Prospector\nUsing Survey Data to Create Existing Surfaces\n\nSession 2: Putting the Survey Database to Work (August 18) \n\nStudying a Survey Network\nWorking with Survey Points\nTaking Advantage of Figures\nCreating Survey Point Groups\nUsing Survey Queries\nRunning Mapcheck\nUtilizing the Geodetic Calculator
URL:https://zentekconsultants.net/event/automating-survey-drafting-in-civil-3d-ii-2/2026-08-17/
LOCATION:Online
CATEGORIES:Automating Survey Drafting in Civil 3D II,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260819T103000
DTEND;TZID=America/New_York:20260819T123000
DTSTAMP:20260714T125115Z
CREATED:20260605T111638Z
LAST-MODIFIED:20260714T125115Z
UID:10004643-1787135400-1787142600@zentekconsultants.net
SUMMARY:Public Agency Work in Civil 3D II
DESCRIPTION:This course builds on the basics to focus on the specific Civil 3D tools you need for utility and infrastructure projects in public works. You’ll learn to construct collaborative models\, integrate design elements from multiple disciplines\, and complete utility projects efficiently\, giving you the practical skills to manage complex public agency designs with confidence. \nThis four (4) hour course is delivered in two (2)\, two-hour long sessions that students can attend online\, right from their own desk. A live instructor will explain the detailed functions\, and address questions as the class progresses. \nNote: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Pipe Networks \n\nLaying out gravity systems using design rules\nAdjusting the vertical design of pipe runs in profile\nAdding and modifying structures and pipes\nUsing catchments to analyze drainage areas\n\nSession 2: Pressure Networks \n\nUnderstanding how pressure pipes are influenced by other design elements\nCreating pipe runs from other objects\nPlacing pressure pipes in profile and avoiding conflicts\nCombining pipe runs and adding appurtenances
URL:https://zentekconsultants.net/event/public-agency-work-in-civil-3d-ii/2026-08-19/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Public Agency Work in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260819T143000
DTEND;TZID=America/New_York:20260819T163000
DTSTAMP:20260722T140008Z
CREATED:20260615T141455Z
LAST-MODIFIED:20260722T140008Z
UID:10004666-1787149800-1787157000@zentekconsultants.net
SUMMARY:Surface Design in Civil 3D II
DESCRIPTION:Advanced site grading and subdivision design are essential skills for Civil 3D professionals. This course focuses on manipulating TIN surfaces\, creating and editing feature lines\, and using grading objects to develop precise\, dynamic site designs. You’ll also explore parcel layouts\, labeling\, and reports – giving you the tools to efficiently produce high-quality grading and subdivision designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Grading Design Tools (August 19) \n\nUnderstanding Feature Lines\nCreating Feature Lines from existing objects\nCreating New Feature Lines\nUsing Stepped Offsets\nWhat are Grading Objects\nCreating simple Grading Objects\nDynamic interaction of Grading Objects\nBuilding surfaces from Grading Objects\n\nSession 2: Subdivision Grading (August 20) \n\nCreating Dynamic Parcel Layouts\nEditing Parcels\nControlling Parcel and distance/bearing labels\nAdding custom fields (addresses) to Parcels\nGenerating Parcel Reports/Legends\nExtracting Feature Lines from Corridors\nWorking with Feature Lines\nCreating side lot controls with Feature Lines\nUsing Grading Objects to daylight rear yards
URL:https://zentekconsultants.net/event/surface-design-in-civil-3d-ii-2/2026-08-19/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Surface Design in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260819T153000
DTEND;TZID=America/New_York:20260819T173000
DTSTAMP:20260625T113709Z
CREATED:20260625T113643Z
LAST-MODIFIED:20260625T113709Z
UID:10004514-1787153400-1787160600@zentekconsultants.net
SUMMARY:Creating Civil 3D Standards I
DESCRIPTION:This course is designed for CAD Managers and civil/site professionals who want to improve efficiency and consistency across their Civil 3D projects. You’ll learn to develop and implement system-wide standards\, including templates\, layers\, annotation\, and plotting standards. The class also covers object display and label styles\, along with automated labeling techniques to streamline workflows and maximize productivity. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Working with C3D Templates (August 19) \n\nCivil 3D Default Settings\nLayers\, Annotation & Plotting Standards for Civil 3D\nAutomating Point Objects with Descriptor Keys and Point Groups\n\nSession 2: It’s All About Style (August 20) \n\nWorking With Object Display Styles\nWorking With & Customizing Label Styles\nAdvanced Annotation: Automate Labeling
URL:https://zentekconsultants.net/event/creating-civil-3d-standards-i-2/2026-08-19/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Creating Civil 3D Standards I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260824T110000
DTEND;TZID=America/New_York:20260824T130000
DTSTAMP:20260625T114518Z
CREATED:20260625T114452Z
LAST-MODIFIED:20260625T114518Z
UID:10004611-1787569200-1787576400@zentekconsultants.net
SUMMARY:Building Civil 3D Corridors I
DESCRIPTION:Linear corridor design is a foundational skill for any Civil 3D designer. This course guides you through creating and editing corridors\, building assemblies\, and controlling transitions. You’ll also learn how to design elbows and cul-de-sacs\, connect multiple baselines\, and develop a cohesive\, accurately graded corridor for real-world roadway projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Corridor Basics (August 24) \n\nCreating and editing an assembly\nBuilding a basic corridor\nUnderstanding the properties of a corridor\nWorking with corridor regions\nTargeting objects for width and elevation\nControlling corridor transitions\n\nSession 2: Working with Cul-de-sacs and Elbows (August 25) \n\nCreating and working with regions\nBuilding cul-de-sac profiles\nCreating cul-de-sac assemblies\nWorking with multiple baselines\nUsing multiple assemblies to a design
URL:https://zentekconsultants.net/event/building-civil-3d-corridors-i/2026-08-24/
LOCATION:Online
CATEGORIES:Building Civil 3D Corridors I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260826T110000
DTEND;TZID=America/New_York:20260826T130000
DTSTAMP:20260629T140844Z
CREATED:20260629T140818Z
LAST-MODIFIED:20260629T140844Z
UID:10004447-1787742000-1787749200@zentekconsultants.net
SUMMARY:Intelligent Road Design in Civil 3D I
DESCRIPTION:Designing roads and corridors in Civil 3D requires a clear understanding of profiles and assemblies. This course walks you step-by-step through creating\, editing\, and controlling road profiles\, as well as building assemblies from sub-assemblies. You’ll gain practical skills to develop accurate\, intelligent corridor models for real-world roadway projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Road Profiles (August 26) \n\nUnderstanding Profiles\nCreating Surface Profiles\nCreating Design Profiles\nEditing Profiles\nProfile Design Control & Rules\n\nSession 2: Corridor Assemblies (August 27) \n\nCreating a Simple Assembly\nInserting Sub-Assemblies\nEditing Sub-Assemblies\nUnderstanding Sub-Assembly controls\nBuilding Assemblies from Sub-Assemblies\nMirroring Assemblies\nEditing Assembly Properties
URL:https://zentekconsultants.net/event/intelligent-road-design-in-civil-3d-i-2/2026-08-26/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Intelligent Road Design in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260826T153000
DTEND;TZID=America/New_York:20260826T173000
DTSTAMP:20260625T113803Z
CREATED:20260625T113733Z
LAST-MODIFIED:20260625T113803Z
UID:10004516-1787758200-1787765400@zentekconsultants.net
SUMMARY:Creating Civil 3D Standards II
DESCRIPTION:Building on Level I\, this course guides CAD Managers and advanced Civil 3D users through developing robust data controls and automation workflows across their firm. You’ll learn to organize project structures\, manage data shortcuts and Xrefs\, and implement templates and pre-defined standards for pipes\, point groups\, and surfaces – ensuring consistent\, efficient\, and high-quality Civil 3D project delivery. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Data Control (August 26) \n\nProject Structures for Civil Firms\nOrganizing Your Design Data with Tool Palettes\nManaging Data Shortcuts and Xrefs\n\nSession 2: Advanced Automation (August 27) \n\nTemplates for Plan\, Section\, and Profile Production\nBuilding the Pipe Network Database\nPre-Defined Point Groups and Surfaces
URL:https://zentekconsultants.net/event/creating-civil-3d-standards-ii-2/2026-08-26/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Creating Civil 3D Standards II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260831T110000
DTEND;TZID=America/New_York:20260831T130000
DTSTAMP:20260625T114659Z
CREATED:20260625T114659Z
LAST-MODIFIED:20260625T114659Z
UID:10004613-1788174000-1788181200@zentekconsultants.net
SUMMARY:Building Civil 3D Corridors II
DESCRIPTION:Linear corridor design is a foundational skill for any Civil 3D designer. This course guides you through creating and editing corridors\, building assemblies\, and controlling transitions. You’ll also learn how to design elbows and cul-de-sacs\, connect multiple baselines\, and develop a cohesive\, accurately graded corridor for real-world roadway projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Working with Intersections and Hammerheads (August 31) \n\nUnderstanding the Intersection Wizard\nSetting intersection defaults\nUnderstanding intersection regions and assembly sets\nIntegrating turn lanes into intersections\nSetting up user-defined intersection targeting\n\nSession 2: Corridor Sections & Surfaces (September 1) \n\nUsing the Corridor Section Editor\nSection editor display & parameter controls\nChanging assemblies by section\nAdding & deleting corridor sections\nGenerating a corridor surface\nSetting corridor surface data types & codes\nAdding corridor surface boundaries\nDynamic actions of corridor surfaces
URL:https://zentekconsultants.net/event/building-civil-3d-corridors-ii/2026-08-31/
LOCATION:Online
CATEGORIES:Building Civil 3D Corridors II,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260902T110000
DTEND;TZID=America/New_York:20260902T130000
DTSTAMP:20260629T140948Z
CREATED:20260629T140920Z
LAST-MODIFIED:20260629T140948Z
UID:10004449-1788346800-1788354000@zentekconsultants.net
SUMMARY:Intelligent Road Design in Civil 3D II
DESCRIPTION:Corridor modeling is often the most challenging part of Civil 3D\, but mastering it is essential for accurate road design. This course focuses on creating and editing corridors\, managing regions\, and applying target and slope controls to develop precise\, easy-to-update roadway models. You’ll also learn to generate and control corridor surfaces and sections for professional\, real-world road projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Corridor Creation (September 2) \n\nCreating required components for Corridor creation\nUnderstanding Dynamic Interaction of Corridors\nEditing Corridor Properties\nCorridor Regions\nCreating & Dividing Corridor Regions\nWorking with Surface Targets\nWorking with Width Targets\nWorking with Elevation Targets\n\nSession 2: Corridor Sections & Surfaces (September 3) \n\nUsing the Corridor Section editor\nSection editor display & parameter controls\nChanging Assemblies by section\nAdding & deleting Corridor sections\nGenerating a Corridor Surface\nSetting Corridor Surface data types & codes\nAdding Corridor Surface Boundaries\nDynamic actions of Corridor Surfaces
URL:https://zentekconsultants.net/event/intelligent-road-design-in-civil-3d-ii-2/2026-09-02/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Intelligent Road Design in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260908T110000
DTEND;TZID=America/New_York:20260908T130000
DTSTAMP:20260710T113114Z
CREATED:20260710T113114Z
LAST-MODIFIED:20260710T113114Z
UID:10004619-1788865200-1788872400@zentekconsultants.net
SUMMARY:Survey Mapping In Civil 3D I
DESCRIPTION:Creating accurate survey basemaps in Civil 3D doesn’t have to be complicated. This course guides you through importing and managing point data\, creating and editing point groups\, and using descriptor keys efficiently. You’ll also learn surface modeling techniques\, from defining and building surfaces to analyzing and labeling them\, giving you a solid foundation for survey mapping projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Working with Point Data \n\nCreating and Editing Points\nImporting Point Files\nChanging Point and Label Styles\nManaging Points\nPoint Groups\nDescriptor Keys\n\nSession 2: Surface Modeling \n\nUnderstanding Surface Definitions\nCreating a Surface\nModifying Surfaces\nCreating and Managing Surface Styles\nSurface Analysis and Labeling
URL:https://zentekconsultants.net/event/survey-mapping-in-civil-3d-i/2026-09-08/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Survey Mapping in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260915T110000
DTEND;TZID=America/New_York:20260915T130000
DTSTAMP:20260710T113311Z
CREATED:20260710T113311Z
LAST-MODIFIED:20260710T113311Z
UID:10004621-1789470000-1789477200@zentekconsultants.net
SUMMARY:Survey Mapping In Civil 3D II
DESCRIPTION:This course focuses on practical survey drafting techniques in Civil 3D that are often overlooked in general training. You’ll learn how to efficiently use bearing\, distance\, and angle tools\, draft with point controls\, and check your work with Civil 3D’s inquiry tools. The class also covers creating and labeling alignments\, generating surface profiles\, and managing profile view styles—giving you the skills to produce precise\, professional survey maps. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Survey Drafting \n\nDirection\, Distance & Angles\nDrafting With Point Controls\nSide Shot\, Offset & Deflection\nInquiry Tool\nMap Check and Calculators\n\nSession 2: Alignments & Profiles \n\nCreating and Editing Alignments\nLabeling Alignments and Creating Tables\nCreating Surface Profiles\nManaging Profile View Styles
URL:https://zentekconsultants.net/event/survey-mapping-in-civil-3d-ii/2026-09-15/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Survey Mapping in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260917T103000
DTEND;TZID=America/New_York:20260917T123000
DTSTAMP:20260720T130651Z
CREATED:20260720T130651Z
LAST-MODIFIED:20260720T130651Z
UID:10004656-1789641000-1789648200@zentekconsultants.net
SUMMARY:Customizing Corridor Assemblies in Civil 3D I
DESCRIPTION:The standard Civil 3D assemblies often don’t meet the unique needs of complex corridor designs. This course teaches designers how to create custom subassemblies using Subassembly Composer. You’ll learn the interface\, define points\, links\, shapes\, and parameters\, and explore advanced geometry techniques such as intersection points\, curved geometry\, surface links\, and daylighting to build assemblies tailored to your projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Understanding the Basics \n\nGetting to Know the User Interface\nDefining Points\, Links\, and Shapes\nCreating Input/Output Parameters\nSetting Up Target Parameters\nImporting PKT Files into Civil 3D\n\nSession 2: Advanced Geometry \n\nDriving Intersection Points\nCreating Curved Geometry\nUsing Surface Links for Roadway Rehab\nDaylighting Parabolically\nUnderstanding Auxiliary Geometry
URL:https://zentekconsultants.net/event/customizing-corridor-assemblies-in-civil-3d-i/2026-09-17/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Customizing Corridor Assemblies in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260921T110000
DTEND;TZID=America/New_York:20260921T130000
DTSTAMP:20260722T115522Z
CREATED:20260722T115522Z
LAST-MODIFIED:20260722T115522Z
UID:10004660-1789988400-1789995600@zentekconsultants.net
SUMMARY:Work Smarter in Autodesk Civil 3D I
DESCRIPTION:This course is perfect for AutoCAD users ready to level up their Civil 3D skills or for anyone looking to refresh and strengthen their understanding of civil and site design workflows. You’ll explore the Civil 3D environment\, dynamic objects\, surfaces\, and labeling\, while learning essential drawing creation\, template setup\, and linear design techniques to work more efficiently on real-world projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: The Autodesk Civil 3D Environment \n\nUnderstanding Dynamic Objects\nGetting to Know the User Interface\nCreating Label and Display Styles\nWorking with Surfaces\n\nSession 2: Drawing Creation & Linear Design \n\nStart\, Learn & Create Tabs\nSetting Up Templates\nUsing Drawing Scale and Map Zones\nWorking with Alignments and Profiles\nCreating Data Shortcuts and References
URL:https://zentekconsultants.net/event/work-smarter-in-autodesk-civil-3d-i/2026-09-21/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Work Smarter in Autodesk Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260924T103000
DTEND;TZID=America/New_York:20260924T123000
DTSTAMP:20260720T130816Z
CREATED:20260720T130816Z
LAST-MODIFIED:20260720T130816Z
UID:10004658-1790245800-1790253000@zentekconsultants.net
SUMMARY:Customizing Corridor Assemblies in Civil 3D II
DESCRIPTION:Building on Level I\, this course teaches advanced techniques for creating intelligent\, reusable subassemblies with Subassembly Composer. You’ll explore complex geometry\, conditional subassemblies\, offset and filleted links\, and marked points\, while learning to organize workflows with embedded flowcharts\, sequences\, and variables. By the end\, you’ll be able to develop automated corridor tools that simplify future projects and improve productivity. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: More Advanced Geometry \n\nUsing Marked Points with Custom Assemblies\nFilleting Link Segments\nCreating Offset Links\nDeveloping Conditional Subassemblies with Loop Geometry\n\nSession 2: Tools for Workflow \n\nOrganizing Subassembly Geometry with Embedded Flowcharts and Sequences\nBuilding Switch and Enumeration Sequences Using Variables
URL:https://zentekconsultants.net/event/customizing-corridor-assemblies-in-civil-3d-ii/2026-09-24/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Customizing Corridor Assemblies in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260928T110000
DTEND;TZID=America/New_York:20260928T130000
DTSTAMP:20260722T115706Z
CREATED:20260722T115706Z
LAST-MODIFIED:20260722T115706Z
UID:10004662-1790593200-1790600400@zentekconsultants.net
SUMMARY:Work Smarter in Autodesk Civil 3D II
DESCRIPTION:This hands-on course is designed for Civil 3D users who want to see how projects come together in real-world workflows. You’ll learn to build assemblies and corridors\, analyze surfaces\, plot sections\, and design gravity and pressure pipe systems. Ideal for intermittent users or anyone looking to refresh and expand their Civil 3D skills. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Understanding 3D Design \n\nSetting Up Assemblies and Corridors\nWorking with Corridor Surfaces\nPlotting Sections\nUsing Analysis and Query Tools\n\nSession 2: Designing Gravity & Pressure Systems \n\nUnderstanding Part Catalogs\nAssembling Part Lists\nLaying Out Pipe Runs\nPipe Runs in Profile View
URL:https://zentekconsultants.net/event/work-smarter-in-autodesk-civil-3d-ii/2026-09-28/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Work Smarter in Autodesk Civil 3D II
END:VEVENT
END:VCALENDAR