BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ZenTek Consultants - ECPv6.15.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://zentekconsultants.net
X-WR-CALDESC:Events for ZenTek Consultants
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260413T110000
DTEND;TZID=America/New_York:20260413T130000
DTSTAMP:20260407T115623
CREATED:20260216T152613Z
LAST-MODIFIED:20260216T152643Z
UID:10004409-1776078000-1776085200@zentekconsultants.net
SUMMARY:Automating Survey Drafting in Civil 3D I
DESCRIPTION:Survey drafting in Civil 3D can be time-consuming—but with automation\, you can drastically speed up basemap creation. This course introduces “field-to-finish” survey processes\, guiding you through configuring survey databases\, importing field data\, setting up linework code sets\, and creating styles. You’ll gain the skills to streamline survey workflows and maximize efficiency. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Introduction to Field to Finish \n\nIntroducing the Survey Interface\nConfiguring Survey Settings\nCreating a Project-based Survey Database\nAdditional Supporting Databases\nImporting Field Data\nImporting Events\nAnalyzing Networks\n\nSession 2: Setting Up for Field to Finish \n\nConfiguring Linework Code Sets\nCreating Styles for Field to Finish\nConfiguring Figure Prefixes for Field-defined Linework\nSetting up Description Keys for Port Import
URL:https://zentekconsultants.net/event/automating-survey-drafting-in-civil-3d-i/2026-04-13/
LOCATION:Online
CATEGORIES:Automating Survey Drafting in Civil 3D I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260414T110000
DTEND;TZID=America/New_York:20260414T130000
DTSTAMP:20260407T115623
CREATED:20260216T152613Z
LAST-MODIFIED:20260216T152643Z
UID:10004410-1776164400-1776171600@zentekconsultants.net
SUMMARY:Automating Survey Drafting in Civil 3D I
DESCRIPTION:Survey drafting in Civil 3D can be time-consuming—but with automation\, you can drastically speed up basemap creation. This course introduces “field-to-finish” survey processes\, guiding you through configuring survey databases\, importing field data\, setting up linework code sets\, and creating styles. You’ll gain the skills to streamline survey workflows and maximize efficiency. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Introduction to Field to Finish \n\nIntroducing the Survey Interface\nConfiguring Survey Settings\nCreating a Project-based Survey Database\nAdditional Supporting Databases\nImporting Field Data\nImporting Events\nAnalyzing Networks\n\nSession 2: Setting Up for Field to Finish \n\nConfiguring Linework Code Sets\nCreating Styles for Field to Finish\nConfiguring Figure Prefixes for Field-defined Linework\nSetting up Description Keys for Port Import
URL:https://zentekconsultants.net/event/automating-survey-drafting-in-civil-3d-i/2026-04-14/
LOCATION:Online
CATEGORIES:Automating Survey Drafting in Civil 3D I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260416T110000
DTEND;TZID=America/New_York:20260416T130000
DTSTAMP:20260407T115623
CREATED:20260210T165724Z
LAST-MODIFIED:20260210T165745Z
UID:10004403-1776337200-1776344400@zentekconsultants.net
SUMMARY:Surface Design in Civil 3D I
DESCRIPTION:Mastering surface design in Civil 3D is essential for efficient site modeling and design. This course guides you through the fundamentals of creating\, labeling\, and displaying surfaces\, as well as controlling contour and point styles. You’ll also learn how to manage surface components such as points\, boundaries\, and breaklines\, giving you the skills to develop accurate and professional site surfaces with confidence. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Surfaces Made Simple \n\nUnderstanding Surfaces\nSetting Surface Labels/Display\nControlling Contour Display Styles\nCreating/Modifying Surface Display Styles\nCreating/Modifying Surface Label Styles\nAdding Contour Labels\nAdding Point Labels\n\nSession 2: Surface Component Controls \n\nAdding Points/Point Groups\nAdding Boundaries\nAdding/Editing Surface Points\nAdding/Editing Breaklines\nSwap Edges and Smooth Surfaces\nReviewing Surface Details/Information
URL:https://zentekconsultants.net/event/surface-design-in-civil-3d-i/2026-04-16/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Surface Design in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260417T110000
DTEND;TZID=America/New_York:20260417T130000
DTSTAMP:20260407T115623
CREATED:20260210T165724Z
LAST-MODIFIED:20260210T165745Z
UID:10004404-1776423600-1776430800@zentekconsultants.net
SUMMARY:Surface Design in Civil 3D I
DESCRIPTION:Mastering surface design in Civil 3D is essential for efficient site modeling and design. This course guides you through the fundamentals of creating\, labeling\, and displaying surfaces\, as well as controlling contour and point styles. You’ll also learn how to manage surface components such as points\, boundaries\, and breaklines\, giving you the skills to develop accurate and professional site surfaces with confidence. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Surfaces Made Simple \n\nUnderstanding Surfaces\nSetting Surface Labels/Display\nControlling Contour Display Styles\nCreating/Modifying Surface Display Styles\nCreating/Modifying Surface Label Styles\nAdding Contour Labels\nAdding Point Labels\n\nSession 2: Surface Component Controls \n\nAdding Points/Point Groups\nAdding Boundaries\nAdding/Editing Surface Points\nAdding/Editing Breaklines\nSwap Edges and Smooth Surfaces\nReviewing Surface Details/Information
URL:https://zentekconsultants.net/event/surface-design-in-civil-3d-i/2026-04-17/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Surface Design in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260420T110000
DTEND;TZID=America/New_York:20260420T130000
DTSTAMP:20260407T115623
CREATED:20260216T153014Z
LAST-MODIFIED:20260216T153014Z
UID:10004411-1776682800-1776690000@zentekconsultants.net
SUMMARY:Automating Survey Drafting in Civil 3D II
DESCRIPTION:Building on basic survey automation\, this course dives into advanced Civil 3D survey database processes that every survey drafter needs. You’ll learn post-processing techniques\, managing point groups\, correcting coding errors\, creating surfaces\, and leveraging survey queries and tools like Mapcheck and the Geodetic Calculator—enabling efficient\, accurate\, and automated survey workflows. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Post-Processing \n\nImporting Survey Data\nAdjusting for Coding Errors\nApplying Cosmetic Changes to Imported Data\nWorking with Point Groups from the Prospector\nUsing Survey Data to Create Existing Surfaces\n\nSession 2: Putting the Survey Database to Work \n\nStudying a Survey Network\nWorking with Survey Points\nTaking Advantage of Figures\nCreating Survey Point Groups\nUsing Survey Queries\nRunning Mapcheck\nUtilizing the Geodetic Calculator
URL:https://zentekconsultants.net/event/automating-survey-drafting-in-civil-3d-ii/2026-04-20/
LOCATION:Online
CATEGORIES:Automating Survey Drafting in Civil 3D II,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260420T150000
DTEND;TZID=America/New_York:20260420T170000
DTSTAMP:20260407T115623
CREATED:20260204T122540Z
LAST-MODIFIED:20260206T185613Z
UID:10004388-1776697200-1776704400@zentekconsultants.net
SUMMARY:Roadway Rehabilitation in Civil 3D II
DESCRIPTION:Building on Level I\, this course dives into advanced rehabilitation corridor techniques in Civil 3D. You’ll learn to create flexible\, editable\, and intelligent rehab models for complex corridors\, including intersections\, custom assembly sets\, and advanced subassembly configurations. The class also covers applying superelevation to rehab projects\, replacing curbs and sidewalks\, and best practices for integrating legacy assemblies\, giving you the tools to efficiently model and manage complex roadway rehabilitation designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Rehab in Complex Corridors \n\nCreating Custom Assembly Sets for Complex Corridors\nAdjusting Rehab Subassembly Parameters\nRehab in Intersections\nAdding and Configuring Additional Subassemblies\n\nSession 2: Rehab and Superelevation \n\nApplying Superelevation to a Roadway Design\nAddressing Superelevation in Rehab\nUsing the Replace Curb and Sidewalk Assemblies\nBest Practices with Legacy Rehab Assemblies
URL:https://zentekconsultants.net/event/roadway-rehabilitation-in-civil-3d-ii/2026-04-20/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Roadway Rehabilitation in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260421T110000
DTEND;TZID=America/New_York:20260421T130000
DTSTAMP:20260407T115623
CREATED:20260216T153014Z
LAST-MODIFIED:20260216T153014Z
UID:10004412-1776769200-1776776400@zentekconsultants.net
SUMMARY:Automating Survey Drafting in Civil 3D II
DESCRIPTION:Building on basic survey automation\, this course dives into advanced Civil 3D survey database processes that every survey drafter needs. You’ll learn post-processing techniques\, managing point groups\, correcting coding errors\, creating surfaces\, and leveraging survey queries and tools like Mapcheck and the Geodetic Calculator—enabling efficient\, accurate\, and automated survey workflows. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Post-Processing \n\nImporting Survey Data\nAdjusting for Coding Errors\nApplying Cosmetic Changes to Imported Data\nWorking with Point Groups from the Prospector\nUsing Survey Data to Create Existing Surfaces\n\nSession 2: Putting the Survey Database to Work \n\nStudying a Survey Network\nWorking with Survey Points\nTaking Advantage of Figures\nCreating Survey Point Groups\nUsing Survey Queries\nRunning Mapcheck\nUtilizing the Geodetic Calculator
URL:https://zentekconsultants.net/event/automating-survey-drafting-in-civil-3d-ii/2026-04-21/
LOCATION:Online
CATEGORIES:Automating Survey Drafting in Civil 3D II,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260423T110000
DTEND;TZID=America/New_York:20260423T130000
DTSTAMP:20260407T115623
CREATED:20260210T165915Z
LAST-MODIFIED:20260210T165915Z
UID:10004405-1776942000-1776949200@zentekconsultants.net
SUMMARY:Surface Design in Civil 3D II
DESCRIPTION:Advanced site grading and subdivision design are essential skills for Civil 3D professionals. This course focuses on manipulating TIN surfaces\, creating and editing feature lines\, and using grading objects to develop precise\, dynamic site designs. You’ll also explore parcel layouts\, labeling\, and reports – giving you the tools to efficiently produce high-quality grading and subdivision designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Grading Design Tools \n\nUnderstanding Feature Lines\nCreating Feature Lines from existing objects\nCreating New Feature Lines\nUsing Stepped Offsets\nWhat are Grading Objects\nCreating simple Grading Objects\nDynamic interaction of Grading Objects\nBuilding surfaces from Grading Objects\n\nSession 2: Subdivision Grading \n\nCreating Dynamic Parcel Layouts\nEditing Parcels\nControlling Parcel and distance/bearing labels\nAdding custom fields (addresses) to Parcels\nGenerating Parcel Reports/Legends\nExtracting Feature Lines from Corridors\nWorking with Feature Lines\nCreating side lot controls with Feature Lines\nUsing Grading Objects to daylight rear yards
URL:https://zentekconsultants.net/event/surface-design-in-civil-3d-ii/2026-04-23/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Surface Design in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260424T110000
DTEND;TZID=America/New_York:20260424T130000
DTSTAMP:20260407T115624
CREATED:20260210T165915Z
LAST-MODIFIED:20260210T165915Z
UID:10004406-1777028400-1777035600@zentekconsultants.net
SUMMARY:Surface Design in Civil 3D II
DESCRIPTION:Advanced site grading and subdivision design are essential skills for Civil 3D professionals. This course focuses on manipulating TIN surfaces\, creating and editing feature lines\, and using grading objects to develop precise\, dynamic site designs. You’ll also explore parcel layouts\, labeling\, and reports – giving you the tools to efficiently produce high-quality grading and subdivision designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Grading Design Tools \n\nUnderstanding Feature Lines\nCreating Feature Lines from existing objects\nCreating New Feature Lines\nUsing Stepped Offsets\nWhat are Grading Objects\nCreating simple Grading Objects\nDynamic interaction of Grading Objects\nBuilding surfaces from Grading Objects\n\nSession 2: Subdivision Grading \n\nCreating Dynamic Parcel Layouts\nEditing Parcels\nControlling Parcel and distance/bearing labels\nAdding custom fields (addresses) to Parcels\nGenerating Parcel Reports/Legends\nExtracting Feature Lines from Corridors\nWorking with Feature Lines\nCreating side lot controls with Feature Lines\nUsing Grading Objects to daylight rear yards
URL:https://zentekconsultants.net/event/surface-design-in-civil-3d-ii/2026-04-24/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Surface Design in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260427T110000
DTEND;TZID=America/New_York:20260427T130000
DTSTAMP:20260407T115624
CREATED:20260303T122647Z
LAST-MODIFIED:20260303T122708Z
UID:10004446-1777287600-1777294800@zentekconsultants.net
SUMMARY:Intelligent Road Design in Civil 3D I
DESCRIPTION:Designing roads and corridors in Civil 3D requires a clear understanding of profiles and assemblies. This course walks you step-by-step through creating\, editing\, and controlling road profiles\, as well as building assemblies from sub-assemblies. You’ll gain practical skills to develop accurate\, intelligent corridor models for real-world roadway projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Road Profiles \n\nUnderstanding Profiles\nCreating Surface Profiles\nCreating Design Profiles\nEditing Profiles\nProfile Design Control & Rules\n\nSession 2: Corridor Assemblies \n\nCreating a Simple Assembly\nInserting Sub-Assemblies\nEditing Sub-Assemblies\nUnderstanding Sub-Assembly controls\nBuilding Assemblies from Sub-Assemblies\nMirroring Assemblies\nEditing Assembly Properties
URL:https://zentekconsultants.net/event/intelligent-road-design-in-civil-3d-i/2026-04-27/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Intelligent Road Design in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260427T150000
DTEND;TZID=America/New_York:20260427T170000
DTSTAMP:20260407T115624
CREATED:20260204T122540Z
LAST-MODIFIED:20260206T185613Z
UID:10004389-1777302000-1777309200@zentekconsultants.net
SUMMARY:Roadway Rehabilitation in Civil 3D II
DESCRIPTION:Building on Level I\, this course dives into advanced rehabilitation corridor techniques in Civil 3D. You’ll learn to create flexible\, editable\, and intelligent rehab models for complex corridors\, including intersections\, custom assembly sets\, and advanced subassembly configurations. The class also covers applying superelevation to rehab projects\, replacing curbs and sidewalks\, and best practices for integrating legacy assemblies\, giving you the tools to efficiently model and manage complex roadway rehabilitation designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Rehab in Complex Corridors \n\nCreating Custom Assembly Sets for Complex Corridors\nAdjusting Rehab Subassembly Parameters\nRehab in Intersections\nAdding and Configuring Additional Subassemblies\n\nSession 2: Rehab and Superelevation \n\nApplying Superelevation to a Roadway Design\nAddressing Superelevation in Rehab\nUsing the Replace Curb and Sidewalk Assemblies\nBest Practices with Legacy Rehab Assemblies
URL:https://zentekconsultants.net/event/roadway-rehabilitation-in-civil-3d-ii/2026-04-27/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Roadway Rehabilitation in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260428T110000
DTEND;TZID=America/New_York:20260428T130000
DTSTAMP:20260407T115624
CREATED:20260303T122647Z
LAST-MODIFIED:20260303T122708Z
UID:10004447-1777374000-1777381200@zentekconsultants.net
SUMMARY:Intelligent Road Design in Civil 3D I
DESCRIPTION:Designing roads and corridors in Civil 3D requires a clear understanding of profiles and assemblies. This course walks you step-by-step through creating\, editing\, and controlling road profiles\, as well as building assemblies from sub-assemblies. You’ll gain practical skills to develop accurate\, intelligent corridor models for real-world roadway projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Road Profiles \n\nUnderstanding Profiles\nCreating Surface Profiles\nCreating Design Profiles\nEditing Profiles\nProfile Design Control & Rules\n\nSession 2: Corridor Assemblies \n\nCreating a Simple Assembly\nInserting Sub-Assemblies\nEditing Sub-Assemblies\nUnderstanding Sub-Assembly controls\nBuilding Assemblies from Sub-Assemblies\nMirroring Assemblies\nEditing Assembly Properties
URL:https://zentekconsultants.net/event/intelligent-road-design-in-civil-3d-i/2026-04-28/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Intelligent Road Design in Civil 3D I
END:VEVENT
END:VCALENDAR