BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ZenTek Consultants - ECPv6.17.5//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:ZenTek Consultants
X-ORIGINAL-URL:https://zentekconsultants.net
X-WR-CALDESC:Events for ZenTek Consultants
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261019T110000
DTEND;TZID=America/New_York:20261019T130000
DTSTAMP:20260826T112441Z
CREATED:20260806T112512Z
LAST-MODIFIED:20260826T112441Z
UID:10004719-1792407600-1792414800@zentekconsultants.net
SUMMARY:Hydrology Design in Civil 3D With SSA II
DESCRIPTION:Building on Level I\, this course dives deeper into designing\, sizing\, and analyzing hydrologic systems using Civil 3D’s Storm & Sanitary Analysis (SSA). You’ll learn to create and manage pipe networks\, export designs to SSA\, perform detailed inlet and conveyance analysis\, connect sub-basins and structures\, handle bypass flow\, and generate hydrology reports. By the end\, you’ll be able to integrate verified hydrologic functionality into your Civil 3D projects for accurate\, efficient\, and fully documented designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Inlet and Pipe Design in Civil 3D \n\nBuilding Pipe Parts Lists in C3D\nSetting up Migration Defaults\nDrawing a Pipe Network in C3D\nExporting Pipe Networks to SSA\n\nSession 2: Inlet and Pipe Design in SSA \n\nAnalysis and IDF Curve Settings\nStructure and Conveyance Controls\nConnecting Sub-Basins and Structures\nWorking with By-Pass Flow\nNetwork Analysis and Sizing Process\nReports in SSA\nExporting Design to a File\nImporting Designs and updating Civil 3D
URL:https://zentekconsultants.net/event/hydrology-design-in-civil-3d-with-ssa-ii/2026-10-19/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Hydrology Design in Civil 3D With SSA II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261019T110000
DTEND;TZID=America/New_York:20261019T130000
DTSTAMP:20260819T153359Z
CREATED:20260819T153334Z
LAST-MODIFIED:20260819T153359Z
UID:10004705-1792407600-1792414800@zentekconsultants.net
SUMMARY:Roadway Rehabilitation in Civil 3D I
DESCRIPTION:Road repair and rehabilitation are often misunderstood in Civil 3D. This course introduces designers to the fundamentals of creating and managing rehab corridors. You’ll learn to set up new rehab corridors\, apply basic corridor controls\, edit and add subassemblies\, and use the Rehab Manager to generate reports for accurate\, efficient roadway rehabilitation design. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Understanding Roadway Rehab Corridors \n\nRoad Rehab Concepts Explained\nExisting Design Elements for Rehab Corridors\nCreating a New Rehab Corridor\nBasic Rehab Corridor Controls\n\nSession 2: Finalizing Roadway Rehab Design \n\nFinding and Editing Rehab Subassemblies\nAdding Standard Subassemblies to Rehab Assemblies\nUsing Rehab Manager\nGenerating Reports
URL:https://zentekconsultants.net/event/roadway-rehabilitation-in-civil-3d-i-2/2026-10-19/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Roadway Rehabilitation in Civil 3D I
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261020T110000
DTEND;TZID=America/New_York:20261020T130000
DTSTAMP:20260826T112441Z
CREATED:20260806T112512Z
LAST-MODIFIED:20260826T112441Z
UID:10004720-1792494000-1792501200@zentekconsultants.net
SUMMARY:Hydrology Design in Civil 3D With SSA II
DESCRIPTION:Building on Level I\, this course dives deeper into designing\, sizing\, and analyzing hydrologic systems using Civil 3D’s Storm & Sanitary Analysis (SSA). You’ll learn to create and manage pipe networks\, export designs to SSA\, perform detailed inlet and conveyance analysis\, connect sub-basins and structures\, handle bypass flow\, and generate hydrology reports. By the end\, you’ll be able to integrate verified hydrologic functionality into your Civil 3D projects for accurate\, efficient\, and fully documented designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Inlet and Pipe Design in Civil 3D \n\nBuilding Pipe Parts Lists in C3D\nSetting up Migration Defaults\nDrawing a Pipe Network in C3D\nExporting Pipe Networks to SSA\n\nSession 2: Inlet and Pipe Design in SSA \n\nAnalysis and IDF Curve Settings\nStructure and Conveyance Controls\nConnecting Sub-Basins and Structures\nWorking with By-Pass Flow\nNetwork Analysis and Sizing Process\nReports in SSA\nExporting Design to a File\nImporting Designs and updating Civil 3D
URL:https://zentekconsultants.net/event/hydrology-design-in-civil-3d-with-ssa-ii/2026-10-20/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Hydrology Design in Civil 3D With SSA II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261021T110000
DTEND;TZID=America/New_York:20261021T130000
DTSTAMP:20260819T155515Z
CREATED:20260819T155515Z
LAST-MODIFIED:20260819T155515Z
UID:10004709-1792580400-1792587600@zentekconsultants.net
SUMMARY:Substation Site Development in Civil 3D II
DESCRIPTION:Building on the fundamentals covered in Level I\, this course introduces alignment\, profile\, and corridor modeling workflows essential for refining substation site designs. You’ll learn to design access roads and drainage features\, develop and edit profiles\, and create simple corridors for roads and ditches. The class emphasizes integrating grading\, surfaces\, profiles\, and corridors into a cohesive Civil 3D model for accurate design\, documentation\, and quantity analysis. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Alignments & Profiles \n\nCreating alignments for access roads and utilities\nAlignment styles\, labels\, and design criteria\nGenerating existing ground profiles from surfaces\nDesigning proposed profiles with vertical geometry tools\nProfile view styles and band sets\nManaging multiple profiles and profile data references\nProfile annotation and documentation standard\n\nSession 2: Simple Corridor Modeling & Design Integration \n\nAssemblies and subassemblies for access roads and ditches\nCorridor creation and targeting (alignments\, profiles\, surfaces)\nCorridor regions and transitions\nExtracting corridor surfaces and feature lines\nCreating cross sections and section views\nCorridor quantity takeoffs and material volumes\nIntegrating grading\, profiles\, and corridors into a unified model
URL:https://zentekconsultants.net/event/substation-site-development-in-civil-3d-ii/2026-10-21/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Substation Site Development in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261021T150000
DTEND;TZID=America/New_York:20261021T170000
DTSTAMP:20260824T130019Z
CREATED:20260824T130001Z
LAST-MODIFIED:20260824T130019Z
UID:10004547-1792594800-1792602000@zentekconsultants.net
SUMMARY:Beginning Autodesk Civil 3D I
DESCRIPTION:This course is designed for anyone new to Autodesk Civil 3D who wants to build a strong foundation in civil and site design. You’ll learn the essentials of navigating the Civil 3D environment\, understanding dynamic objects\, and working with the program’s powerful drafting and design tools. Whether you’re transitioning from 2D AutoCAD\, coming from another design platform\, or starting fresh in drafting\, this class will give you the skills and confidence to create\, manage\, and annotate your first Civil 3D projects effectively. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \nNote: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: The Autodesk Civil 3D Environment \n\nWhat is Civil 3D\nUnderstanding Dynamic Objects\nUnderstanding the User Interface\nWorking with the Civil 3D Toolspace\nUnderstanding Label and Display Styles\n\nSession 2: Drawing Creation\, Setup & Settings \n\nStart\, Learn\, & Create Tabs\nWorking With Templates\nDrawing Scale and Map Zones\nDefault Settings\nUnderstanding the Settings Tab\nImporting/Exporting Settings and Styles
URL:https://zentekconsultants.net/event/beginning-autodesk-civil-3d-i-2/2026-10-21/
LOCATION:Online
CATEGORIES:Beginning Autodesk Civil 3D I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261022T110000
DTEND;TZID=America/New_York:20261022T130000
DTSTAMP:20260819T155515Z
CREATED:20260819T155515Z
LAST-MODIFIED:20260819T155515Z
UID:10004710-1792666800-1792674000@zentekconsultants.net
SUMMARY:Substation Site Development in Civil 3D II
DESCRIPTION:Building on the fundamentals covered in Level I\, this course introduces alignment\, profile\, and corridor modeling workflows essential for refining substation site designs. You’ll learn to design access roads and drainage features\, develop and edit profiles\, and create simple corridors for roads and ditches. The class emphasizes integrating grading\, surfaces\, profiles\, and corridors into a cohesive Civil 3D model for accurate design\, documentation\, and quantity analysis. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Alignments & Profiles \n\nCreating alignments for access roads and utilities\nAlignment styles\, labels\, and design criteria\nGenerating existing ground profiles from surfaces\nDesigning proposed profiles with vertical geometry tools\nProfile view styles and band sets\nManaging multiple profiles and profile data references\nProfile annotation and documentation standard\n\nSession 2: Simple Corridor Modeling & Design Integration \n\nAssemblies and subassemblies for access roads and ditches\nCorridor creation and targeting (alignments\, profiles\, surfaces)\nCorridor regions and transitions\nExtracting corridor surfaces and feature lines\nCreating cross sections and section views\nCorridor quantity takeoffs and material volumes\nIntegrating grading\, profiles\, and corridors into a unified model
URL:https://zentekconsultants.net/event/substation-site-development-in-civil-3d-ii/2026-10-22/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Substation Site Development in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261022T150000
DTEND;TZID=America/New_York:20261022T170000
DTSTAMP:20260824T130019Z
CREATED:20260824T130001Z
LAST-MODIFIED:20260824T130019Z
UID:10004716-1792681200-1792688400@zentekconsultants.net
SUMMARY:Beginning Autodesk Civil 3D I
DESCRIPTION:This course is designed for anyone new to Autodesk Civil 3D who wants to build a strong foundation in civil and site design. You’ll learn the essentials of navigating the Civil 3D environment\, understanding dynamic objects\, and working with the program’s powerful drafting and design tools. Whether you’re transitioning from 2D AutoCAD\, coming from another design platform\, or starting fresh in drafting\, this class will give you the skills and confidence to create\, manage\, and annotate your first Civil 3D projects effectively. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \nNote: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: The Autodesk Civil 3D Environment \n\nWhat is Civil 3D\nUnderstanding Dynamic Objects\nUnderstanding the User Interface\nWorking with the Civil 3D Toolspace\nUnderstanding Label and Display Styles\n\nSession 2: Drawing Creation\, Setup & Settings \n\nStart\, Learn\, & Create Tabs\nWorking With Templates\nDrawing Scale and Map Zones\nDefault Settings\nUnderstanding the Settings Tab\nImporting/Exporting Settings and Styles
URL:https://zentekconsultants.net/event/beginning-autodesk-civil-3d-i-2/2026-10-22/
LOCATION:Online
CATEGORIES:Beginning Autodesk Civil 3D I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261023T110000
DTEND;TZID=America/New_York:20261023T130000
DTSTAMP:20260923T124312Z
CREATED:20260625T114452Z
LAST-MODIFIED:20260923T124312Z
UID:10004758-1792753200-1792760400@zentekconsultants.net
SUMMARY:Building Civil 3D Corridors I
DESCRIPTION:Linear corridor design is a foundational skill for any Civil 3D designer. This course guides you through creating and editing corridors\, building assemblies\, and controlling transitions. You’ll also learn how to design elbows and cul-de-sacs\, connect multiple baselines\, and develop a cohesive\, accurately graded corridor for real-world roadway projects. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of AutoCAD Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Corridor Basics (August 24) \n\nCreating and editing an assembly\nBuilding a basic corridor\nUnderstanding the properties of a corridor\nWorking with corridor regions\nTargeting objects for width and elevation\nControlling corridor transitions\n\nSession 2: Working with Cul-de-sacs and Elbows (August 25) \n\nCreating and working with regions\nBuilding cul-de-sac profiles\nCreating cul-de-sac assemblies\nWorking with multiple baselines\nUsing multiple assemblies to a design
URL:https://zentekconsultants.net/event/building-civil-3d-corridors-i/2026-10-23/
LOCATION:Online
CATEGORIES:Building Civil 3D Corridors I,Civil 3D Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261023T110000
DTEND;TZID=America/New_York:20261023T130000
DTSTAMP:20260819T153453Z
CREATED:20260819T153429Z
LAST-MODIFIED:20260819T153453Z
UID:10004389-1792753200-1792760400@zentekconsultants.net
SUMMARY:Roadway Rehabilitation in Civil 3D II
DESCRIPTION:Building on Level I\, this course dives into advanced rehabilitation corridor techniques in Civil 3D. You’ll learn to create flexible\, editable\, and intelligent rehab models for complex corridors\, including intersections\, custom assembly sets\, and advanced subassembly configurations. The class also covers applying superelevation to rehab projects\, replacing curbs and sidewalks\, and best practices for integrating legacy assemblies\, giving you the tools to efficiently model and manage complex roadway rehabilitation designs. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Rehab in Complex Corridors \n\nCreating Custom Assembly Sets for Complex Corridors\nAdjusting Rehab Subassembly Parameters\nRehab in Intersections\nAdding and Configuring Additional Subassemblies\n\nSession 2: Rehab and Superelevation \n\nApplying Superelevation to a Roadway Design\nAddressing Superelevation in Rehab\nUsing the Replace Curb and Sidewalk Assemblies\nBest Practices with Legacy Rehab Assemblies
URL:https://zentekconsultants.net/event/roadway-rehabilitation-in-civil-3d-ii-2/2026-10-23/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Roadway Rehabilitation in Civil 3D II
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261023T150000
DTEND;TZID=America/New_York:20261023T170000
DTSTAMP:20260924T104112Z
CREATED:20260811T123156Z
LAST-MODIFIED:20260924T104112Z
UID:10004777-1792767600-1792774800@zentekconsultants.net
SUMMARY:Creating Civil 3D Standards II
DESCRIPTION:Building on Level I\, this course guides CAD Managers and advanced Civil 3D users through developing robust data controls and automation workflows across their firm. You’ll learn to organize project structures\, manage data shortcuts and Xrefs\, and implement templates and pre-defined standards for pipes\, point groups\, and surfaces – ensuring consistent\, efficient\, and high-quality Civil 3D project delivery. \nThis course is delivered in 2 two-hour sessions. A live instructor explains the detailed functions and addresses questions as the class progresses. \n​Note: Instructor will present using Autodesk Civil 3D 2026. Students who wish to follow along with instructor are encouraged to use the same version. \nPrerequisite: Students should have a working knowledge of Autodesk Civil 3D. \nRecording: Registrants for a course will receive access to a recording of each session for 7 consecutive days. Access will start the next business day after the session ends. \nSession 1: Data Control \n\nProject Structures for Civil Firms\nOrganizing Your Design Data with Tool Palettes\nManaging Data Shortcuts and Xrefs\n\nSession 2: Advanced Automation \n\nTemplates for Plan\, Section\, and Profile Production\nBuilding the Pipe Network Database\nPre-Defined Point Groups and Surfaces
URL:https://zentekconsultants.net/event/__trashed/2026-10-23/
LOCATION:Online
CATEGORIES:Civil 3D Courses,Creating Civil 3D Standards II
END:VEVENT
END:VCALENDAR